AntTech Maxx MTW HopUp Conversion for VFC MP5

Here at AntTech, we LOVE VFC MP5s, but we HATE HopUps that use a slider adjustment arm.

The AntTech Maxx MTW HopUp Conversion for VFC MP5 replaces the OEM HopUp Chamber, allowing you to use a Maxx MTW HopUp Chamber. Specifically, we recommend either the M4W or the MGW.

This product is 3D printed with a Carbon Fiber filled PETG plastic due to its excellent UV and chemical resistance, improved rigidity, higher than normal melting temperature, relatively low cost, and consistent batch-to-batch print quality! 

The model is printed with thick walls and a complex infill pattern to ensure structural integrity. This product was designed and manufactured with end-use conditions in mind!

Package Includes:
- Assembled Conversion Kit
- x3 90D HopUp Spacer O-Rings
- x2 70D HopUp Spacer O-Rings

Tech Notes:
- "Drop-In" is an Airsoft industry lie. AntTech can only attest to part combinations that have worked for us in the past.
- "MP5" Length Nozzles will be too short to work with the Maxx MTW HopUp Chamber. Recommended Nozzle Length is 20.7mm-21.75. The Nozzle you need is not dependent on this Conversion Kit, it is dependent on the tolerance stacking between the Gearbox Shell, Tappet Plate, HopUp Unit.

Successful Part Combination (Use as a reference, do not copy pasta and expect the same results.):
- Retro Arms VFC Spec V2 Shell
- Retro Arms Tappet Plate
- EPeS 20.7mm Nozzle
- Maxx M4W HopUp (Inlet length was adjusted using shims included with HopUp Unit)
- Prometheus Purple Bucking
- PDI Barrel